HAVE BELGARD HELP YOU
Fill out the form to have us find someone in your area for your project.
See More
Diamond Pro® PS Quarried Face
Inspired by the look of natural, unearthed stone, the Diamond Pro® PS Quarried Face pairs the time-tested strength of a Diamond Pro® retaining wall system with the installation ease of a pin locator.
Features & Benefits:
- Pin system installation method.
- Large cores for ease in handling.
- Ease of installation with oversized pin aligning cores.
- Pin cores allow for multiple batter options.
- Build walls in excess of 50 feet when combined with geosynthetic reinforcement.
- One square foot of wall face per block.
- Gravity walls can be built up to 4 feet high, including the buried course, with 7.1 degree batter.
- Minimum outside radius, measured on the top course to the front of the units: 4 feet.
- Minimum inside radius, measured on the base course to the front of the units: 6 feet.
- Setback/System Batter: Near Vertical and 1″/7.10; additional system batter can be created by alternating pin placement on each course of wall.
Diamond Pro® PS Quarried Face is currently not available in your region
To special order this product, please contact a contractor/dealer near you.
Explore similar products available in your region
COMPLEMENTARY BRANDS
Complete the job with products from our sister brands.
Architects and Specifiers, visit our commercial site
For best results enter the ZIP code where your project is located.
Belgard products are manufactured regionally.
Your current location:
